2011-2016 Superduty 6" 4-Link Conversion Kit with NX2 Nitro Shocks (BDS587H)

2011-2016 Superduty 6" 4-Link Conversion Kit with NX2 Nitro Shocks (BDS587H)Set up your 2011 2016 Ford Super Duty F250 and F350 gas truck with this BDS 6" lift kit and 4 link conversion, with clearance for up to 37" tires. Up front it includes gas specific Pro Ride coil springs, heavy duty 4 link control arms that convert the factory stamped steel radius arms, a forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets, and nitrogen charged shocks. The rear uses replacement

Set up your 2011-2016 Ford Super Duty F250 and F350 gas truck with this BDS 6" lift kit and 4-link conversion, with clearance for up to 37" tires. Up front it includes gas-specific Pro-Ride coil springs, heavy-duty 4-link control arms that convert the factory stamped steel radius arms, a forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets, and nitrogen charged shocks. The rear uses replacement Glide-Ride leaf springs with an integrated overload leaf, u-bolts, brake line brackets, and a matching set of NX2 Nitro or FOX Performance shocks.

The triple-stage Glide-Ride leaf springs run a progressive rate: the primary leafs handle everyday driving, the secondary leafs engage under moderate load, and the bottom overload engages when fully loaded for maximum hauling capacity. This reduces axle wrap and maintains ride quality unloaded without sacrificing payload.

Features

• Easy, 100 percent bolt-on installation
• Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
• Heavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel
• Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
• Fabricated steel blocks provide level stance from front to rear
• Standard NX2 Nitro shocks with vehicle-specific valving for better control
• Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
• Nitrogen-charged
• Twin-tube design
• 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• 1-3/8-inch high-flow piston
• Self-lubricating seals
• Silver powder coat finish

Specs

• Front Lift Method: Coil Spring
• Rear Lift Method: Leaf Spring
• Shocks Included: Yes
• Front Lift Height: 6 inch
• Rear Lift Height: 5 inch

Recommended Tire & Wheel Fitment

• Tire Size: 37x12.5
• Wheel Diameter: 18x9, 20x9
• Back Spacing: 4.5/4.5

Notes

• Front exhaust modification may be required to clear front drive shaft (gas only).
• If equipped with 2-piece driveshaft, a driveshaft alignment kit may be required.
• Although extremely rare, front driveline vibration may occur.
• If equipped with rear sway bar, 123009 required.
• U-bolts will not work on dually.
• This lift system retains the factory rear blocks; choose the height of your factory lift blocks for proper u-bolt length.

Includes

• BDS003629, Ford F250/350 6 Inch Rear Spring (UPC 658848611393)
• BDS013010, 05 Ford F250/350 4-link Kit (1of2) (UPC 658848612994)
• BDS013014, 11 Ford F250/350 4-link 6 Inch Box (2of2) (UPC 658848613038)
• BDS013609, 2011-2016 Ford F250/F350 Rear Box Kit -- 3-1/2 inch Factory Block (UPC 658848613779)
• BDS033612, 2005-2016 Ford F250/F350 6 Inch (Gas) Coil Kit (UPC 658848616596)
• BDS85750, Shock- 27.40 x 16.20 x 2-3/8 - S50/EB2 (UPC 711745609600)
• BDS85760, Shock- 33.00 x 19.25 x 2-3/8 - EB1/EB1 (UPC 711745609693)