sPOD BantamX PowerTray > Chevy Colorado 12-22

sPOD BantamX PowerTray > Chevy Colorado 12-22Harness the power and capabilities of the all new BantamX by sPOD to power your aftermarket lights and accessories. Mounting hardware for circuit breaker and sPOD included. sPOD and Circuit Breaker sold separately. To purchase PowerTrays compact waterproof circuit breakers click here. Works with sPOD's BantamX (8 switch) and SourceLT (6 switch). Installs right behind the drivers side headlight by using two factory mounting locations and requires no

Harness the power and capabilities of the all new BantamX by sPOD to power your aftermarket lights and accessories.

Mounting hardware for circuit breaker and sPOD included.

sPOD and Circuit Breaker sold separately.

To purchase PowerTrays compact waterproof circuit breakers click here.

Works with sPOD's BantamX (8-switch) and SourceLT (6-switch).

Installs right behind the drivers side headlight by using two factory mounting locations and requires no drilling or permanent modification to your vehicle.  Note: you do not need to remove the drivers side headlight to install this PowerTray. Simply pry up the plastic tab on the headlight housing slightly and you will have enough clearance to fit a wrench under to access the factory bolt hidden under it. 

Specifications:

• PEM® Fasteners - Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.
• 1/8th Inch 5052 Aircraft Aluminum - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.
• Waterjet manufacturing - Guarantees precise cuts with an accuracy of ±0.003", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.
• Chamfered edges - This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.
• Unparalleled stability - Utilizing two points of contact on two of the sides, you can be sure that your valuable electronics are safe and supported.
• Power Made Easy - Delivered right to your door with step-by-step installation instructions.