130rd Saiga 12K Magazine - PETG

130rd Saiga 12K Magazine - PETGAllows you to convert the standard magazine (45 rounds) into 130 round magazines by using the internal components of a Cyma MP5 magazine. The assembly process is very simple and does not require any modifications to either magazine, neither the Saiga mag nor the MP5 mag. The high magazine capacity allows you to fire all rounds except the last 5, which will remain inside the magazine due to the projects design. During testing, no feeding issues were

Allows you to convert the standard magazine (45 rounds) into 130-round magazines by using the internal components of a Cyma MP5 magazine. The assembly process is very simple and does not require any modifications to either magazine, neither the Saiga mag nor the MP5 mag. The high magazine capacity allows you to fire all rounds except the last 5, which will remain inside the magazine due to the project’s design. During testing, no feeding issues were experienced, and each shot consisted of 3 BBs with no malfunctions.

To refill the gas, you need to remove the magazine from the lower section and then take out the gas reservoir to refill it. There is a hole at the top of the feeding section that makes it easier to remove the internal magazine from the shell using a screwdriver or hex key.

BBs can be reloaded from the top of the magazine, just like with the standard Saiga magazine.

Pros:

• Huge capacity (almost 3 times the original capacity). After testing, the gas reservoir allows for approximately 40 shots. After 40 shots, the shot power decreases significantly and barely functions properly.

• Uses easy-to-find parts (Cyma MP5 magazines can be found everywhere).

• No permanent modifications required.

Cons:

• Due to the magazine’s curve, the design is somewhat unusual.

• Does not have a last-round bolt hold-open function.

• You must remove the internal magazine to refill the gas.

Here is a video of the assembly process:

Enjoy!