Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Matek ELRS PWM Receiver ELRS-R24-P6 (2.4ghz)Are you looking to buy a Matek ELRS 2. 4GHz R24 P6 Receiver in Australia? ELRS has quickly become one of the most popular link system choices for many pilots, and we are excited to bring Matek's lineup of these receivers to you. SPECIFICATIONS: ESP8285, SX1281 Antenna connector: IPEX MHF 1 6x PWM outputs Support 2~8S VBat voltage sense RF Frequency: 2. 4GHz (2400~2480MHz) Telemetry power: 12dbm Receiver output protocol: PWM Input voltage: 4~9V DC @ +
Are you looking to buy a Matek ELRS 2.4GHz R24-P6 Receiver in Australia?
ELRS has quickly become one of the most popular link system choices for many pilots, and we are excited to bring Matek's lineup of these receivers to you.
SPECIFICATIONS:
- ESP8285, SX1281
- Antenna connector: IPEX MHF 1
- 6x PWM outputs
- Support 2~8S VBat voltage sense
- RF Frequency: 2.4GHz (2400~2480MHz)
- Telemetry power: 12dbm
- Receiver output protocol: PWM
- Input voltage: 4~9V DC @ “+” pad
- Voltage sense: 34V Max. @ “VBat” pad
- Power dissipation: 45mA(binding), 85mA(wifi mode)
- PCB size: 20mm x 18mm
- Weight: 2g w/ antenna
PACKAGE INCLUDES:
- 1x MATEK ELRS-R24-P6 ELRS 2.4GHZ PWM RECEIVER
- 1x IPEX MHF1 Antennas. 15cm
- Dupont 2.54 pins (Board is shipped unsoldered)
FIRMWARE:
- ExpressLRS 3.0 or newer, DIY 2.4 GHz / DIY 2400 RX PWMP EX
- ExpressLRS wiki for PWM receiver, Click HERE
- Make sure Receiver and TX module both are running ExpressLRS 3.0 or newer
FLASHING INFORMATION:
- Receiver has ExpressLRS 3.0 preloaded with binding phrase “123456”, the Receiver will never enter binding mode if using the traditional binding procedure.
- You need to reflash it with your binding phrase OR go into WebUI to set your binding phrase.
Flashing via Wifi
- Disconnect ESC and servos from receiver first.
- Power on receiver by 5V source. Receiver’s LED(Red) will blink slow at first, and after 20s, it should blink fast indicating it’s on Wifi Hotspot Mode.
- More detailed steps, pls refer this page.
- Target: DIY 2.4 GHz / DIY 2400 RX PWMP EX
Flashing via UART
- Disconnect ESC and servos from receiver first.
- Wire the receiver into the USB-TTL adapter, with TX on receiver connected to the Rx on the USB-TTL, and RX on receiver connected to the Tx of the USB-TTL. Wire 5V and GND of the USB-TTL to 5V and GND of the Receiver.
- Press the boot button while powering on the receiver, then release – the Red LED on receiver should now be solid.
- Select the target DIY 2.4 GHz / DIY 2400 RX PWMP EX and “UART” for Flashing Method, set your bind phrase and Firmware Options and once done, click on Build and Flash.
Browse more
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 1415 reviews
Sort
Product Reviews
★★★★★ 5
WOULD BUY AGAIN.
EASY TO PUT TOGETHER. WORKS EXATCLY AS i NEEDED. I USED ONLY 3 PANELS.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026
★★★★★ 5
Great for closing off areas of my apt
Size: 6 Panel-120"W, Color: Beige
I love this...I ordered the larger size and it's great. It's a little wobbly however
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 11, 2026
★★★★★ 5
Very nice!
Color: Black, Size: Four Panel
Great inexpensive screen! It was easy to put together and works perfectly for what it was purchased for.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 16, 2025
★★★★★ 5
It works perfectly for what I needed it for.
Color: Black, Size: Four Panel
Easy to assemble. Nice size in width and height. Perfect divider for our bedroom downstairs. Like the flexibility of having it straight or can use it in an accordion style.
Lightweight and sturdy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 30, 2025
★★★★★ 4
Do NOY buy used.
4th time buying this, and thank god I did. Bought this last one as "used-like new"... instructions are missing, 4 screws are missing, the present ones were loose in the box, and the cloth panels are I-balled-them-up-and-used-them-to-play-basketball wrinkled. Do NOT buy this used. It's only because I had leftover parts and previous knowledge that I was able to assemble this.
On to product. Super lightweight, easy assembly, looks pretty clean up close and from a distance. Panels stay on bars via velcro. This is not a sturdy screen, so it's not for a kid's room. But if you want a room divider that has no other job than to divide with quiet dignity, it works.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 31, 2024