Dynam DHC-2 Beaver V2 Red 4S Sea/Land STOL RC Float Plane 1.5m w/ Flaps

Dynam DHC-2 Beaver V2 Red 4S Sea/Land STOL RC Float Plane 1.5m w/ FlapsThe Dynam DHC 2 Beaver V2 is a highly detailed scale replica of the De Havilland Canada Beaver seaplane, an iconic single engine, high wing STOL (short take off and landing) aircraft. Designed for both land and water operations, this Dynam RC seaplane model is well suited to a variety of flying environments. Made of durable EPO foam, the Dynam DHC 2 Beaver V2 comes pre installed with electronics such as a Detrum BM3720 650KV brushless outrunner motor,

The Dynam DHC-2 Beaver V2 is a highly detailed scale replica of the De Havilland Canada Beaver seaplane, an iconic single-engine, high-wing STOL (short take-off and landing) aircraft. Designed for both land and water operations, this Dynam RC seaplane model is well suited to a variety of flying environments.

Made of durable EPO foam, the Dynam DHC-2 Beaver V2 comes pre-installed with electronics such as a Detrum BM3720-650KV brushless outrunner motor, TomCat Skylord-50A ESC, and servos, and is equipped with floats and removable landing gear, which allows the Beaver to take off and land on water when floats are installed or on land when the landing gear is installed. The Dynam Beaver V2 Red (1500 mm/59 in wingspan) is powered by a Detrum brushless motor for superior performance.The RC aircraft is controlled via a GAVIN 8-channel 2.4GHz radio system, ensuring precise control and smooth flight. Its lightweight design makes it easy to operate whether flying on water or land.

This PNP (Plug and Play) model only requires a GAVIN 8-channel 2.4GHz radio, an MSR66A 6-channel receiver, and 4S 14.8V 2200~2800mAh 25C Li-Polymer batteries to start. It is perfect for experienced flying enthusiasts and those who want to explore water aviation.

Features

Durable and lightweight EPO construction
Aileron, rudder, and elevator controls
Comes with operational flaps
Realistic scale features, including DHC-2 paint scheme and molded panel lines
Set of floats with operational rudders for water takeoffs/taxiing and landings
Powerful Detrum BM3720-650KV brushless outrunner motor
TomCat Skylord-50A ESC
2-blade propeller
Fixed landing gear included for land-based operation
LED navigation lights add scale realism and help make the plane more visible during dawn and dusk flights
GAVIN 8CH 2.4GHz radio system
Detrum MSR66A 6CH 2.4Ghz Mini Receiver iStone 6-Axis Gyro Stabilizer w/ ABS System
Comes with a decal set
4S 14.8V 2200~2800mAh Li-Po 25C battery w/ XT60 Connector
Suitable for intermediate or experienced pilots

Specifications

Aircraft Type: Float Plane
Wingspan: 1500mm (59in)
Overall Length: 958mm (37.7in)
Flying Weight: 1400-1750g (55.1-68.8oz)
Wing Loading: 58g/dm²
CG (Center of Gravity): 45-50mm from the leading edge of the wing at the root
Power System: Detrum BM3720-650KV brushless outrunner motor - (pre-installed)
Electronic Speed Control: TomCat Skylord-50A ESC - (pre-installed)
Propeller: 2-blade propeller 13*6
Servo: 7x 9g micro servos - (pre-installed)
Landing Gear: Float & Fixed Gear
Required Transmitter: GAVIN-8C 2.4Ghz 8-Channel or above
Required Receiver: MSR66A 6CH 2.4Ghz (iStone 6-Axis Gyro Stabilizer w/ ABS System)
Required Battery: 4S 14.8V 2200~2800mAh Li-Po 25C w/ XT60 Connector
Aileron: Yes
Elevator: Yes
Rudder: Yes
Flaps: Yes
Lights: Yes
Approx. Flying Time: 8 minutes
Material: EPO Foam
Skill Level: Intermediate
Assembly Time: 1 hour
Age Level: 14+
Recommended Environment: Outdoor

What's the difference between RTF, BNF, SPNP and PNP?

PNP (Plug-N-Play) RC airplanes have everything you need EXCEPT a transmitter, receiver, and battery pack (battery & charger). It contains model kits, Detrum motors, TomCat Skylord ESCs, and servos.

BNF (Bind-N-Fly) RC airplanes come with everything you need to get in the air EXCEPT the Transmitter and battery pack (battery & charger). It contains model kits, Detrum motors, TomCat Skylord ESCs, servos, and an iStone gyro receiver. They are easy to use, versatile, and safe, making them the perfect choice for beginners and experienced pilots. The BNF (Bind and Fly) version, receivers such as the MSR66A work exclusively with Detrum transmitters.

Dynam SPNP (PNP + iStone All V2) RC airplane is a versatile and user-friendly aircraft designed for RC enthusiasts. Combining an easy plug-and-play setup with the advanced iStone stabilization system, it suits a wide range of pilots. The PNP + iStone version includes the iStoneAll V2 6-axis gyro stabilizer, compatible with major radio transmitter brands like Futaba, Spektrum, Detrum, and etc., providing excellent versatility and flight performance.

iStone All V2 Gyro Stabilizer Features:

6-axis high-precision stabilization
Auto-recovery and one-click rescue
Compatible with most receivers
Adjustable parameters and sensitivity via 3-in-1 programming card with LCD
Gyro-off mode for manual flight

The PNP configuration and iStone All V2 stabilization system make this plane ideal for beginners, while offering features appreciated by intermediate pilots.

Dynam SRTF version is based on the standard RTF (Ready to Fly), which integrates the iStone 6-Axis Gyro Stabilizer w/ ABS System: RC airplanes get everything in a box to fly. The radio system (Transmitter and receiver), battery pack (battery and charger), and all other required electric parts are included and pre-installed. It contains model kits, Detrum motors, TomCat Skylord ESCs, servos, Detrum transmitters, iStone gyro receivers, battery, charger, and adapter. RTF planes are a great way to enjoy the thrill of flying without too much hassle.

SRTF-6C Version: Includes a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Gavin-6C transmitter, MSR66A iStone gyro receiver, battery, charger, and adapter.

SRTF-8C Version: Features a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Gavin-8C transmitter, MSR66A iStone gyro receiver, battery, charger, and adapter.

SRTF-DT9 Version: Comes with a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Blitz-DT9 transmitter (programming & telemetry), SR86A-G 8-channel gyro receiver, battery, charger, and adapter.