TRACTUFF BOLT-IN K SERIES OIL PAN BAFFLE
SKU: 53012903479

TRACTUFF BOLT-IN K SERIES OIL PAN BAFFLE

Sale price$116.95 Regular price$129.95
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

TRACTUFF BOLT-IN K SERIES OIL PAN BAFFLEThe Bolt in K Series Oil Pan Baffle is a unique entry level product that easily installs between the OEM Windage Tray and Oil Pan Floor. The baffle extends into the oil pan, dividing the sump into three sections, with the largest section surrounding the oil pumps pickup. The dividers section off the sump so as to keep oil from moving aggressively from one side of the pan to the other. The open top design allows for quick return of oil back to the pan.

The Bolt-in K Series Oil Pan Baffle is a unique entry-level product that easily installs between the OEM Windage Tray and Oil Pan Floor. The baffle extends into the oil pan, dividing the sump into three sections, with the largest section surrounding the oil pumps pickup. The dividers section off the sump so as to keep oil from moving aggressively from one side of the pan to the other. The open top design allows for quick return of oil back to the pan. The design is simple and effective... it keeps the pickup submerged longer than a pan without!!

 

 

 

Features:
  • Easy Bolt-in Design
  • Fits all engines using K20A/A2/Z1 oil pump and PRB/ PRC/ RBB pans. 
  • Cost Effective Entry Level Oil Control for Light Track Duty/ Street Use.
  • Manufactured in the USA
  • US grade 6061-T6 aluminum
  • High-Strength Blind Rivets
  • Improved Mounting Hardware

Installation Procedure:

1. You’re going to start by getting the vehicle up in the air and supported by properly rated jack-stands. Drain the oil from the oil pan, removing the oil pan, and finally remove the OEM windage try.

 

2. Grab the small bag of hardware and lay out the contents to take inventory.  

3. We personally package all hardware kits and double check the bags prior to a product being shipped so you should never be missing an item but if you'd like... take inventory prior to draining your oil or removing your pan. The bag should contain 6 x M6 studs, 6 x 14mm spacers, 6 x 6mm push nut retainers, 6 x M6 serrated lock-nuts, and a .02 oz. tube of blue Loctite.

 

 4.  Shake the small tube of Loctite and twist off the cap. Apply a small amount to each of the stud’s shortest end.

 

 5. Install the coated end of the stud into the original windage tray hardware's position. Be sure to completely thread the studs until they bottom out. 

 

6. Install the factory windage tray (not shown), 1 x 14mm spacer, and 1 x 6mm push nut retainer (see next step).

 

7. Push the 6mm push nut retainer down until it makes contact with the 14mm spacer. The push-nut retainer is used to keep the windage tray and 14mm spacers from falling off while you repeat the process for the other five. If you are building the engine on a stand... you can opt not to install the push-nuts, they do present a bit of a challenge if/ when you ever decide to remove the baffle.

 

8. The windage tray (not pictured) and spacers should all be in place and ready for you to install the baffle. The baffle needs to be snaked through the oil pumps pickup tube and aligned with the 6 x studs. The pick-up tube suction cup does not need to be removed... we just happened to have this pump lying around and used it for the instructions.

 

9. The baffle should be free from any interference and lay completely flat on the 6 spacers. Any portion of the baffle that comes in contact with the pump should be adjusted. 

 

10. Install the 6 x M6 serrated lock-nuts and tighten well. If you don’t plan on removing the baffle often... you may use the remaining Loctite to provide additional vibration resistance.

 

And you’re done!! This is what the finished product should look like... up-side-down obviously. 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 53012903479

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.9 ★★★★★
Based on 1261 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Rook
Pawtucket, US
★★★★★ 5
Simple Solution for Using USB-A Cables with USB-C Chargers
I used these for the first time last week when I needed to plug a USB-A cable into a newer USB-C charger. They worked exactly as expected. The connection was solid, and the device powered on without any issues. I’ve generally had good experiences with Anker products, and these adapters are consistent with that—simple and reliable for what they’re designed to do. These are useful for bridging older USB-A cables with newer USB-C power sources, especially for basic charging needs. Build quality feels solid for the size, and they’re small enough to keep with your cables without getting in the way. Overall: a straightforward and reliable adapter for using USB-A cables with USB-C chargers.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
B
Verified Purchase
B
Louisville, US
★★★★★ 4
Tight connections
works but difficult to use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
C
Verified Purchase
Carson Terry
West Palm Beach, US
★★★★★ 5
Great product, mic and camera compatible
I bought this to use a webcam with a built-in mic on my Microsoft Windows Surface Pro 8. When I first plugged in the webcam both the camera and the mic were recognized, however the mic was not picking up sound. After double checking the device settings, my privacy settings, the device drivers, and everything else I simply unplugged and replugged the camera in. Then everything worked as I had hoped. Great value for a great product. I trust Anker to reliably protect and provide stability for all of my devices. Simple product, plug and play. Sleek, simple design
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 9, 2026
T
Verified Purchase
Tyler
Charlottesville, US
★★★★★ 5
Great product
Super compact in size and works great I’ve had no issues with them at all
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2026
H
Verified Purchase
History Guru
Houston, US
★★★★★ 5
Great piece of equipment. Worked for mouse, hard drive, and digital camera all into a laptop.
Works great. I used to plug in a mouse, an external hard drive, and an overhead Nikon digital camera for historic digitization of documents and books. It small and compatible and there were no connection or power problems. It feels well built and sturdy and the cord connection to the device is strong and flexible.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 2, 2026

recommand products