Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
ATV312HU11M2Main Range of product Altivar 312 Product or component type Variable speed drive Product destination Asynchronous motors Product specific application Simple machine Assembly style With heat sink Component name ATV312 Motor power kW 1. 1 kW Motor power hp 1. 5 hp [Us] rated supply voltage 200 240 V 15 10 % Supply frequency 50 60 Hz 5 5 % Network number of phases Single phase Line current 12. 1 A at 200 V, Isc = 1 kA 10. 2 A at 240 V EMC filter
Main
| Range of product | Altivar 312 |
| Product or component type | Variable speed drive |
| Product destination | Asynchronous motors |
| Product specific application | Simple machine |
| Assembly style | With heat sink |
| Component name | ATV312 |
| Motor power kW | 1.1 kW |
| Motor power hp | 1.5 hp |
| [Us] rated supply voltage | 200...240 V - 15...10 % |
| Supply frequency | 50...60 Hz - 5...5 % |
| Network number of phases | Single phase |
| Line current | 12.1 A at 200 V, Isc = 1 kA 10.2 A at 240 V |
| EMC filter | Integrated |
| Apparent power | 2.4 kVA |
| Maximum transient current | 10.4 A for 60 s |
| Power dissipation in W | 74 W at nominal load |
| Speed range | 1…50 |
| Asynchronous motor control profile | Factory set : constant torque Sensorless flux vector control with PWM type motor control signal |
| Electrical connection | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5 mm² AWG 14 L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 5 mm² AWG 10 |
| Supply | Internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection Internal supply for reference potentiometer (2.2 to 10 kOhm): 10...10.8 V 10 mA, protection type: overload and short-circuit protection |
| Communication port protocol | CANopen Modbus |
| IP degree of protection | IP20 on upper part without cover plate IP21 on connection terminals IP31 on upper part IP41 on upper part |
| Option card | Communication card for CANopen daisy chain Communication card for DeviceNet Communication card for Fipio Communication card for Modbus TCP Communication card for Profibus DP |
Complementary
| Supply voltage limits | 170…264 V |
| Network frequency | 47.5...63 Hz |
| Prospective line Isc | 1 kA |
| Continuous output current | 6.9 A at 4 kHz |
| Output frequency | 0…500 kHz |
| Nominal switching frequency | 4 kHz |
| Switching frequency | 2...16 kHz adjustable |
| Transient overtorque | 170…200 % of nominal motor torque |
| Braking torque | 150 % during 60 s with braking resistor 100 % with braking resistor continuously 150 % without braking resistor |
| Regulation loop | Frequency PI regulator |
| Motor slip compensation | Suppressable Automatic whatever the load Adjustable |
| Output voltage | <= power supply voltage |
| Tightening torque | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6: 0.6 N.m L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-: 1.2 N.m |
| Insulation | Electrical between power and control |
| Analogue input number | 3 |
| Analogue input type | AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance: 30000 Ohm AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance: 30000 Ohm AI3 configurable current 0...20 mA, impedance: 250 Ohm |
| Sampling duration | AI1, AI2, AI3: 8 ms analog LI1...LI6: 4 ms discrete |
| Response time | AOV, AOC 8 ms for analog R1A, R1B, R1C, R2A, R2B 8 ms for discrete |
| Linearity error | +/- 0.2 % for output |
| Analogue output number | 1 |
| Analogue output type | AOC configurable current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits AOV configurable voltage: 0...10 V, impedance: 470 Ohm, resolution: 8 bits |
| Discrete input logic | Logic input not wired (LI1...LI4), < 13 V (state 1) Negative logic (source) (LI1...LI6), > 19 V (state 0) Positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1) |
| Discrete output number | 2 |
| Discrete output type | Configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles Configurable relay logic: (R2A, R2B) NC - 100000 cycles |
| Minimum switching current | R1-R2 10 mA at 5 V DC |
| Maximum switching current | R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms R1-R2: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms R1-R2: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms R1-R2: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms |
| Discrete input number | 6 |
| Discrete input type | (LI1...LI6) programmable at 24 V, 0…100 mA for PLC, impedance: 3500 Ohm |
| Acceleration and deceleration ramps | S, U or customized Linear adjustable separately from 0.1 to 999.9 s |
| Braking to standstill | By DC injection |
| Protection type | Input phase breaks: drive Line supply overvoltage and undervoltage safety circuits: drive Line supply phase loss safety function, for three phases supply: drive Motor phase breaks: drive Overcurrent between output phases and earth (on power up only): drive Overheating protection: drive Short-circuit between motor phases: drive Thermal protection: motor |
| Insulation resistance | >= 500 mOhm 500 V DC for 1 minute |
| Local signalling | 1 LED (red)drive voltage: Four 7-segment display unitsCANopen bus status: |
| Time constant | 5 ms for reference change |
| Frequency resolution | Analog input: 0.1...100 Hz Display unit: 0.1 Hz |
| Connector type | 1 RJ45 for Modbus/CANopen |
| Physical interface | RS485 multidrop serial link |
| Transmission frame | RTU |
| Transmission rate | 10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen 4800, 9600 or 19200 bps for Modbus |
| Number of addresses | 1…127 for CANopen 1…247 for Modbus |
| Number of drive | 127 for CANopen 31 for Modbus |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Height | 143 mm |
| Width | 107 mm |
| Depth | 152 mm |
| Net weight | 1.8 kg |
Environment
| Dielectric strength | 2040 V DC between earth and power terminals 2880 V AC between control and power terminals |
| Electromagnetic compatibility | 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 |
| Standards | IEC 61800-5-1 IEC 61800-3 |
| Product certifications | CSA NOM C-Tick UL DNV GOST |
| Pollution degree | 2 |
| Protective treatment | TC |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| Relative humidity | 5…95 % without condensation conforming to IEC 60068-2-3 5…95 % without dripping water conforming to IEC 60068-2-3 |
| Ambient air temperature for storage | -25…70 °C |
| Ambient air temperature for operation | -10…50 °C without (with protective cover on top of the drive) -10…60 °C with derating factor (without protective cover on top of the drive) |
| Operating altitude | <= 1000 m without 1000...2000 m with current derating 1 % per 100 m |
Contractual warranty
| Warranty | 18 months |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 929 reviews
Sort
Product Reviews
★★★★★ 5
Eufy l50 SES
Style: L50 SES
Works great, easy to setup. It's my second unit for the basement level. Picks up all the fur from a large Rottweiler and a small Rat Terrier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 21, 2025
★★★★★ 1
Not worth it
Style: L50 SES
Worked great for 5 months and then the WiFi connectivity stopped working rendering the vacuum useless. Because it’s refurbished it was past its warranty and the company refused to do anything about it other than offer a discount on a product that cost four times as much even after the discount.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 28, 2026
★★★★★ 4
Great vacuum, but it only works on 2.4 GHz Wi-Fi
Style: L50 SES
I missed the last line on the description that states in only works on 2.4 GHz Wi-Fi. I have AT&T fiber and the router they installed only runs on 5.0 GHz. The vacuum still works, but without all of the fancy conveniences. Just be aware of this and if you are not familiar with what it means, check before you purchase one. This is the only reason I am giving it a 4 and not a 5. It is my fault for missing it, so just be aware.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 25, 2026
★★★★★ 5
Great vacuum!!
Style: L50 SES
I love this vacuum. I had to work a little to get the map right for it, but it is great. We have allergies and it helps so much and saves so much time. It does take a while to do the whole house, but I have it programmed to run while we are at work and it’s so nice to come home to a freshly vacuumed house.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 22, 2025
★★★★★ 2
Eufy dropped the ball on this vacuum
Style: L50 SES
I’ll start by saying the reason I purchased this vacuum, is because I have a Eufy 25c robot vacuum that is very dependable. I decided I wanted an upgrade because the 25C was great for cleaning, but I had to empty it way too often. I just knew I would love the L50 SES. I thought it was just what I was looking for a self emptying robot vacuum with a 60 day fill capacity. Allowing 2 months before I needed to touch my vacuum. Here’s where things went wrong. I never got a chance to test the vacuum because it wouldn’t connect to my WiFi and I tried everything. Now this wouldn’t have been a problem if the L50 came with a remote control like the 25C. Unfortunately I had to rely on the App and since the L50 couldn’t connect to my WiFi, I couldn’t control the vacuum. The reason I gave 2 stars is because the customer service at Eufy is awesome. I was given the option to replace the vacuum with a new one but after researching the L50 i decided to return it for a refund. Apparently this model has a defect, because I found so many negative reviews about the same issue with the same model. The thing is I never read reviews because I have a Eufy smart scale, 25C robot vacuum and an Eufy security system and everything works perfectly. So in the end I purchased a Shark Matrix Self emptying robot vacuum and a Shark self emptying stick vacuum. If Shark’s vacuum preforms well, Eufy might have lost a valued customer. I hope this review helps someone make a informed decision. By the way Eufy self emptying vacuum needs replacement bags and the Shark Matrix robot vacuum doesn’t need bags. I will say the suction and design on the Eufy L50 SES was great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2025
recommand products
John Gullidge - Samhain, Issue 36, Jan/Feb 1993
11.00
Trex 1/35 US M10 Upgrade Set 3D Printed TR35047
22.99
Andrew Collins - The Sword and the Stone Issue Two, Supernaturalist, 1982, Signed
202.50
Peter Brookes of The Times, Little, Brown, 2002
21.00
Flank Steak, Plain 9oz, with Asparagus and 1 Cup Basmati Rice
27.45