Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Glass Four Door Cooling Fridge Table 2230mm EPF3741Glass Four Door Cooling Fridge Table 2230mm EPF3741 Stainless steel interior and exterior with galvanized back panel 43C ambient working temperature Auto defrost function Fan forced cooling All European parts, Embraco compressor, EBM fan motor Carel digital controller Shelf rails support GN Pans Gas: R134A for Fridges Insulation Foam: C5H10, ODP, Zero emissions Castors as standard Pre installed mid shelves Double glazed glass hinged doors Allow 100 mm
Glass Four Door Cooling Fridge Table 2230mm EPF3741
- Stainless steel interior and exterior with galvanized back panel
- 43ºC ambient working temperature
- Auto-defrost function
- Fan-forced cooling
- All European parts, Embraco compressor, EBM fan motor
- Carel digital controller
- Shelf rails support GN Pans
- Gas: R134A for Fridges
- Insulation Foam: C5H10, ODP, Zero emissions
- Castors as standard
- Pre-installed mid-shelves
- Double-glazed glass hinged doors
- Allow 100 mm clearance for air ventilation
- Light inside
Best Suited To: Restaurants / Cafes, Clubs / Pubs / Bars, Quick Service Restaurants, Convenience / Petrol / Supermarkets, Food Production, Bakery / Pastry
Specifications
Doors: 4 Doors Refrigeration Volume: 560 Width: 2230 Depth: 700 Height: 838 Weight: 162 Type: Underbench Fridges Ambient Temperature: 43 degree Packaging Width: 2284 Packaging Depth: 765 Packaging Height: 872 Packaging Weight: 204
2 Years Warranty On All Parts & Labour
Additional 2 Years Warranty Compressor / Motor Parts Up On Registration
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 825 reviews
Sort
Product Reviews
★★★★★ 5
Helpful Tool Kit for MerCruiser Maintenance
This tool kit made servicing the gimbal bearing and checking engine alignment much easier than improvising with generic tools. The machining looks solid and the tools fit properly with MerCruiser components. Helpful set for anyone doing their own marine maintenance work. Definitely useful to have around for sterndrive service jobs.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026
★★★★★ 5
Saves So Much Time, Perfect Fit On Mercruiser Pre-Alpha Outdrive.
This is a very useful kit. Perfect fit to exchange and align the gimbal bearing on a Mercruiser MR/Pre-Alpha Outdrive. The metal rods are strong and well machined to fit the gimbal bearing and the template lines up great with the housing studs. The overall production quality is very good. Great value because the tools are very durable but for me the biggest value is the time saved. I had the bearing out in about 10 minutes. The ability to line up the bearing before attempting to attach the outdrive upper gear unit is very convenient and saves so much time. This are simple tools, very easy to use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
★★★★★ 5
Easy to use
Works great
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
recommand products
Greenwich Travel Bag Damier PM
405.00
AquaVita 12" Trapezoid Air Stone
34.99
AC Infinity Duct Carbon Filter Australian Charcoal 4-Inch
67.99
Hot Wheels Star Wars The Child Hover Pram Inspired by “The Mandalorian” with Flight Stand for Display, for Kids of All Ages
14.99
Wiz Dice 25 Pack of Random D8 Polyhedral Dice in Multiple Colors
15.06