KYO-EI WTS HUB UNIT SYSTEM M12xP1.5 5120W1-60

KYO-EI

5120W1-60

Screw size Thread size: M12 x P1.5
HOLE: 5
PCD: 114.3
hub diameter mm hub dia .: 60
Thickness mm Thickness: 20
inner diameter remove the hub ring Φ : 73mm
hub bolts of height: 27mm
JAN code: 4965581 807379

By eliminating the SET package "WTS hub unit system"
wheel and the gap between the hub of the wide tread spacer and a dedicated hub centric ring, suppresses blur during high-speed driving.
■ genuine and commercially available aluminum wheels with bolt-on mounting, grade up to the wide tread.
■ precise design, the original production of thorough quality control (MADE IN JAPAN) is a high-quality product.
■ hub bolts are adopted using a chromium-molybdenum steel, hardened, high-strength, high durability of the bolt.
■ become the body and Tsuraichi, contribute to the coolness of the appearance. With the widening of the tread, improvement of turning performance.
■ prevent loosening of the spacer in a dedicated nut (for 11~15mm). It can withstand hard sports driving, high reliability.
■ prevent camera shake at high speeds with a dedicated hub centric ring shipped. (After-wheel requires a separate hub ring)
■ by a two-piece structure, rich size variation corresponding to each car manufacturer.
■ Number of holes HOLE: 5H · 4H ■ PCD: 100 · 114.3
■ Thickness Thickness: 11/15/20/25 / 30mm
■ outside diameter outer dia:. 145mm ■ SIZE: M12 × P1 .5 / M12 × P1.25
■ material material: aluminum / bolt (SCM435 chromoly steel)
● 2-sheet set (2pcs sET)
accessories / nut-only-dedicated adapter dedicated ● hub ring

※ Note: the above configuration is a combination of the vehicle hub and a wide tread and the hub.
Please note that we may not be able to mount the hub ring by the wheel.
※ size other than the above size, please purchase a separate dedicated hub ring with the package without the hub ring.

■ hub diameter, model adaptation table Hub Diameter Matcing List
HOLE × PCD × thread pitch / WTS / hub diameter mm hub dia./ models:
5H × 114.3 × P1.5 / 51 ( 11 ~ 30) W1 / 67φ / Mazda Mitsubishi car 5H
5H × 114.3 × P1.5 / 51 (11 ~ 30) W1 / 64φ / Honda car 5H
5H × 114.3 × P1.5 / 51 ( 11 ~ 30) W1 / 60φ / Lexus Toyota car 5H
5H × 100 × P1.5 / 50 (11 ~ 30) W1 / 54φ / Toyota Prius Celica
4H × 100 × P1.5 / 40 (11 ~ 30) W1 / 56φ / Honda, Mitsubishi 4H car
4H × 100 × P1.5 / 40 (11 ~ 30) W1 / 54φ / Daihatsu Mazda 4H cars Toyota 4H car
5H × 114.3 × P1.25 / 51 (11 ~ 30) W3 / 66φ / Nissan 5H / 114.3
5H × 114.3 × P1.25 / 51 (11 ~ 30) W3 / 56φ / Subaru Impreza STi · WRX · Reboogu
5H × 100 × P1.25 / 50 (11 ~ 30) W3 / 56φ / Toyota 86, Subaru 5H / 100 car

※ above-mentioned agreement model, for reference only. Please check the size of the current car when you purchase.
※ to the car manufacturer OEM vehicles, please note. ※ Please check also to screw size.
※ There is a different vehicle of the hub diameter at the front and rear wheels, there are times when you can not use a hub-centric ring.
※ Please contact us for a combination other than the above.
※ In the case of after-sales (outside product) wheel installed, you will need the hub ring (sold separately).
thickness another hub height ● is the next street.
(thickness 11 mm / height 12 mm) (thickness 15 mm / height 13 mm) (thickness 20 mm / height 16 mm) (thickness 25 mm / height 21 mm) (thickness 30 mm / height 26 mm)
12 mm or more, there is a possibility that can not be installed by the shape of the wheel mounting surface.

warning attached non models
● 1 number, 4 number, vehicle type
● mounting surface 8 number is not flat, for special vehicles other than drum brake vehicle
● the is, please contact us.

Notes
of when wide tread spacer mounted ※ Please do not other than domestic cars is mounting.
● If you have received a strong shock to the tire wheel, takes excessive force to the wide tread spacer, there is a possibility to cause damage as it is to use, because it may lead to an accident, the product is used in the absolute do not.
● by offset or the like of the spacer thickness and the wheel, there is a
If you can not attached to the vehicle (contact to protrude from the fender-tire house). When you purchase, on the confirmation of the current car state, please purchase.
● Since the steel wheel mounting surface is not a plane, do not install.
● The front mounting, please attach sure the mounting surface and the vehicle body hub side of the back side of the wheel from dropping rust, the dirt with a wire brush or the like.
● body of the hub bolts, spacer of the hub bolts, do not painted with oil or grease on the mounting nut. There is a possibility that the
bolt may be damaged tightened more than necessary. If you
● on the back side of the body of the hub side and the wheel there is a foreign matter and projections, do not install.
when fitted with a wide tread spacer to the body hub bolts ●, when the bolt is protruding from the spacer, do not install
a wide tread spacer. If you
● on the back side of the mounting wheel of "escape" is, it is possible to attach the wide tread spacer. However, the depth is
genuine stud bolt of "escape", if there is no depth to fully escape, do not install a wide tread spacer. If you
● mounting surface is a drum brake vehicle and projections not flat can not be mounted. In addition, the vehicle of steel wheels Do not install
absolutely.
● Some of the vehicle, there is a vehicle hub diameter is large, there is a case where the wide tread spacers can not be mounted.
When you purchase, please purchase after confirming the vehicle hub diameter and the inner diameter of the wide tread spacer.
● After mounting the wide tread spacer, it is recommended alignment adjustment to prevent uneven wear of the tire.
● If you are installing on a vehicle sliding door, please pay attention to the protrusion of the tire. Sliding door it may not be opened interfere with the tire
.
● For 10mm of hub-centric ring mounted, vehicle hub height 12mm or more vehicles, since there is a possibility that can not be
worn by the shape of the wheel mounting surface, please note.
● attachment, for the failure and damage caused by errors of handling, does not guarantee at all.

Images are for illustration purpose only. Actual product may vary.